Standard application of the fluid (due to the consistency, it should be poured directly into the tire)
Remove the tire from the rim. After pouring the appropriate amount of fluid into the tire, pull it back over the rim and, using a compressor or a special pump with a pressurized chamber, inflate Wheel. It is not recommended to use CO2 cartridges for this purpose, as they react with the sealing fluid.
In order for sealant to spread well on the inner surface of the tire, the inflated Wheel should be rotated for a while and shaken in the air at different angles. Race Day sealant specially contains microcrystals, which can be heard when shaking the tire.
Thus prepared Wheel can be mounted to the bike.
After what time to replenish sealant and how to do it?
The new Race Day fluid formula is designed to meet the biggest challenges, so it is intended for short-term use, such as for a race. After the race, it should be replaced.
sealant Race Day can be mixed with Stan's regular NoTubes fluid.
Note: if you are removing a tire previously used with Race Day fluid, thoroughly wash the inside of the tire of any fluid residue.
